Image displayed shows the product type but may not be the exact item

SKF 61809-2RS1 Sealed Thin Section Ball Bearing 45mm x 58mm x 7mm

Quantity Discounts: Applied at checkout

5+: £36.01      10+: £34.11      25+: £32.22      50+: £30.32

£37.90
(Exc. 20% VAT)
(£45.48 Inc. VAT)
Available for prompt despatch.
+
Ashley Part Number:
618092RS-SKF
Brand:
SKF
Inside Diameter (d):
45.00mm
Outside Diameter (D):
58.00mm
Width (B):
7.00mm
Weight
40 g
SKF
Description

SKF 61809-2RS1 Sealed Thin Section Ball Bearing 45mm x 58mm x 7mm

Thin section ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable thin section ball bearings to accommodate axial loads in both directions.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offer the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

Related Products
Technical Information
d: 45mm
D: 58mm
B: 7mm
Dynamic Load: 6.63 kN
Static Load: 6.1 kN
Fatigue Load Limit: 0.26 kN
Reference Speed: 22000 rpm
Limiting Speed: 6700 rpm
d2:  
D2: 55.4mm
r1,2 min: 0.3mm
da min: 47mm
Da max: 56mm
ra max: 0.3mm

 

 

 

 

Customer Reviews (0)

Be the first to Write a Review for this item!